Resources Record and present

Record a walkthrough

Record yourself talking through the deck. When they press play, the deck moves with you.

A walkthrough is you, in a small round bubble, talking through your deck. When a viewer presses play, the deck moves with you: the slide you were on, or the part of the page you’d scrolled to.

Record it

  1. Open the recorder: Record in the pitch’s ⋯ menu on Your pitches, on its settings page, or at the top of the pitch. Only the pitch’s owner can record.

  2. Allow the camera and microphone when your browser asks.

  3. In the setup card, choose Camera or Voice only, which camera and microphone to use (the bar next to the microphone moves when it hears you), and the bubble spot: where viewers first see you.

  4. Click Start recording and present: talk, and move through the deck the way you would live. Your speaker notes for each part show above the deck, scrolling at your speaking speed.

  5. Click Finish.

The recorder shows the deck at a laptop’s shape, so you present the same layout most viewers see.

Pause and retake a section

  • Pause (or press P) stops the recording, the clock and your notes. Take a breath, read ahead or move the deck; nothing is recorded. Resume counts down from 3 and carries on.
  • Retake section throws away what you just said on this slide or section and puts the deck back where it began, so you can say it again after a 3-second countdown. Pressed right after moving to a new slide, it goes back to the one before. Viewers never see retaken bits, and they don’t count towards your time.

Review and save

After Finish, the review panel lets you:

  • watch the take on the deck;
  • trim the start and end (Start here, End here);
  • move, nudge or delete the moments the deck moves;
  • change where the bubble sits;
  • or Start over.

Then click Save walkthrough. Viewers get it straight away.

Redo one part later

Want to say one part differently? Record over just that part instead of the whole walkthrough.

  1. In the recorder, click Edit current.

  2. Click Redo a part, or click a moment’s dot on the timeline and Redo this part. Adjust where it starts and ends with Start at and End at.

  3. Click Record this part. The deck goes back to where that part began, with your notes on top. Present it, and click Finish. It can be shorter or longer than before.

  4. Watch it back, then Save this part. The rest of the walkthrough moves along to fit.

Undo puts the walkthrough back as it was before the last part you redid.

Remove a walkthrough

To share the deck without the video, open the pitch’s settings (the gear on Your pitches), go to Deck and walkthrough and click Remove walkthrough. The deck stays exactly as it is; viewers just stop seeing your bubble. You can record a new one any time. Earlier versions in Versions keep their own walkthroughs.

What viewers see

  • Your bubble, with a lime ring that fills as it plays. They click it to play or pause, and can drag it to another corner.
  • Follow along: the deck moves with you.
  • Explore: they move around freely, and when they land on a part you talked about, the video plays what you said there. Scrolling or swiping in the deck switches to Explore; a small badge on the bubble switches back.
  • With voice only, the bubble shows your account photo (or your initials), with a ring that moves with your voice.

Good to know

  • Walkthroughs can be up to 20 minutes during the test, and you can record 30 takes an hour.
  • Recording works in current Chrome, Edge, Firefox and Safari.
  • A walkthrough follows the deck’s position only. Clicks inside the deck, like tabs and toggles, aren’t recorded or replayed. See Make it work with walkthroughs.
  • Upload a new version and you choose whether to keep the walkthrough. See Update a pitch.

Contact us.

Questions, ideas or a problem with a pitch. We’ll answer by email.

We only use this to answer you. Privacy policy